86-13380181800
Leo@keermo.com
86-13380181800
Leo@keermo.com
1. Calcium-based grease: good water resistance, but poor heat resistance, the maximum operating temperature: 60 ℃. Price: Low. 2, Sodium-based grease: extremely poor water resistance, heat resistance and rust resistance in general, generally used at about 80 ℃, the price is lower. 3, Aluminum-based grease: good rust resistance, poor heat resistance and water resistance, the maximum use temperature of 50 ℃, the price is low. 4, General lithium-based grease: good heat resistance, water resistance,...
Read More
The working temperature of the lubricating part is an important basis for selecting grease. The typical component that uses grease is a rolling bearing. As far as the relationship between bearing temperature and grease life is concerned, every 10-15 ° C increase in bearing temperature reduces the grease life by about 1/2. Generally, the temperature of the outer ring of the bearing is about 15 ° C lower than the temperature of the inner ring. The temperature of the bearings working at low and med...
Read More
When selecting a grease, the purpose of the grease should be clearly defined. According to the role played by grease, grease can be roughly divided into three categories: friction reduction, protection, and sealing. It depends on which part of the grease needs to be applied, which one is the main role of the grease. grease. As antifriction grease, the range of resistance to high and low temperature, the limit of resistance to rotation speed, and the load should be considered. As a protective gre...
Read More
KE-103 Keermo Solenoid Valve Grease is a white uniform grease prepared by a special process using high performance base oil and modified solid asphalt.
item no. :
KE-103Brand:
KeermoMOQ :
1origins :
CHINAcolor :
White translucent greasePort :
Shenzhen，Guangzhoulead date :
5-7DaysName: Solenoid Valve Grease
Model：KE-103
Overview：
KE-103 Keermo Solenoid Valve Grease is a white uniform grease prepared by a special process using high performance base oil and modified solid asphalt.
Applicable Range：
Solenoid Valve Grease spool valve sleeve, cylinder piston seal for long life lubrication; suitable for control valves, plug valves, insert valves, safety valves, exhaust valves, compressor valves, cone valves, ceramic cocks and pressure system interface parts Lubrication and sealing; for pressure regulating valves, valve stems for electric control valves, bushings, long-lasting sealing lubrication of valve bodies and seals; bearings, pumps, valves for semiconductor equipment and chemical process machinery, high vacuum environment equipment , the lubrication and sealing of the sealing ring; can also be used to contact corrosive gases, liquids (such as halogen, liquid oxygen, etc.) pumps, valves.
Operating Temperature：
-50℃-250℃
Performance Characteristics:
1.excellent wear resistance.
2.excellent fire resistance. Antioxidant.
3.chemical stability without carbon.
4.expected to be long.
5.high and low temperature resistance.
Representative Materialized Data:
Appearance
White translucent grease
Cone penetration
280
Dropping point℃
100,000 shear test cone penetration is not more than
Water resistance (80℃)% is not more than
Copper corrosion (100℃24h)
Steel mesh oil (100℃24h)
Oxidation stability (100℃24h)
Working temperature (℃)
No.
Item
Typical data
1
2
3
N/A
4
30
5
10
6
Qualified
7
2.5
8
0.5
9
-50℃～250℃
Storage notes:
1.Store in a cool, ventilated and dry place, at room temperature below 45℃, and not invert.
2.should not be close to acid and alkali, oxidants and other corrosive substances, not exposure.
3.stacking layers can not exceed 4 tubs, and should be off the ground, 10CM or more from the wall.
Handling precautions:
Handle the product with care and do not use dangerous actions such as throwing or falling.
Specifications:
800g/tin 5kg/tubs 16kg/tubs
Keermo KE-106 High Vacuum Grease Silicone Grease
KE-106 Keermo High Vacuum Silicone Grease is a modified silicone polymer as the main raw material, adding heat-resistant and excellent lubricating properties; a translucent silicone grease compound made by a specific process.
Keermo KE-101 Waterproof Sealing Grease Insulating Grease Waterproof Grease
KE-101 Keermo waterproof sealing grease is a translucent silicone grease compound which is made of modified silicone polymer as the main raw material, adding heat resistance and excellent lubricating properties; and made by a specific process.
Keermo KE-102 PTFE Grease Fluorosilicone Grease
KE-102 Kelmo Teflon Grease is a white uniform grease prepared by a special process using a high performance base oil and a modified solid lubricant.
Keermo KE-105 Cylinder grease Seal grease piston grease
KE-105 Keermo cylinder grease is a white uniform grease prepared by special process using high performance base oil and modified solid lubricant.
Keermo KE-315 Molybdenum disulfide high temperature grease High temperature bearing grease
KE-315 Kelmo Molybdenum Disulfide High Temperature Grease is made of high temperature resistant molybdenum disulfide solid lubricant, and is made of inorganic thickener thickened synthetic oil and polyester with anti-oxidation and anti-rust additives. Molybdenum extrusion grease.
Keermo KE-513 Damping silicone grease
KE-513 Damping Silicone Grease is a combination of high-quality synthetic oil, anti-oxidation, anti-rust, anti-corrosion additives, lubricating additives and inorganic thickeners. It has excellent damping properties, insulation and sealing properties. It is compatible with plastic and metal materials. The damping coefficient is 5 gf/cm.
Keermo KE-903 Ball heavy duty rail silencer grease
KE-903 Ball Heavy Duty Rail Silence Grease is made of highly refined mineral oil as base oil, special lithium soap is thickener and added with anti-oxidation, anti-rust, extreme pressure anti-wear composite additives and other materials. It contains solid lubricant and has excellent high and low temperature performance.
Keermo KE-505 Amplifier sound damping oil damping grease
KE-505 Amplifier Sound Damping Oil is made of very high viscosity synthetic oil based on special tackifier, anti-corrosion, anti-corrosion additive and structural improver. It is designed for joint parts requiring blockage and cushioning. The feel of the shaft of the shaft is adjusted to make the movement of the parts more stable, gentle and accura1
For more than ten years, we have been working on grease research. Our products are widely used in military, automotive, industrial, machinery, and home industries. The company has a professional R & D team, the product has obtained a number of national patents.
Copyright © Dongguan Keermo Grease Co., Ltd. All Rights Reserved. Powered by dyyseo.com
friends link :
the professional team to service !
86-13380181800
Leo@keermo.com
Leo@keermo.com
86-13380181800
