#86-13380181800

#Leo@keermo.com
productbanner
customer case
  • What are the characteristics of common grease types in the market?

    1. Calcium-based grease: good water resistance, but poor heat resistance, the maximum operating temperature: 60 ℃. Price: Low. 2, Sodium-based grease: extremely poor water resistance, heat resistance and rust resistance in general, generally used at about 80 ℃, the price is lower. 3, Aluminum-based grease: good rust resistance, poor heat resistance and water resistance, the maximum use temperature of 50 ℃, the price is low. 4, General lithium-based grease: good heat resistance, water resistance,...

    Read More
  • Select grease according to operating temperature

    The working temperature of the lubricating part is an important basis for selecting grease. The typical component that uses grease is a rolling bearing. As far as the relationship between bearing temperature and grease life is concerned, every 10-15 ° C increase in bearing temperature reduces the grease life by about 1/2. Generally, the temperature of the outer ring of the bearing is about 15 ° C lower than the temperature of the inner ring. The temperature of the bearings working at low and med...

    Read More
  • Choose grease according to purpose

    When selecting a grease, the purpose of the grease should be clearly defined. According to the role played by grease, grease can be roughly divided into three categories: friction reduction, protection, and sealing. It depends on which part of the grease needs to be applied, which one is the main role of the grease. grease. As antifriction grease, the range of resistance to high and low temperature, the limit of resistance to rotation speed, and the load should be considered. As a protective gre...

    Read More
FAQ
Bentonite high temperature grease Bentonite high temperature grease Bentonite high temperature grease Bentonite high temperature grease

Keermo KE-313 Bentonite high temperature grease


KE-313 Bentonite High Temperature Grease is a high temperature resistant grease made from organic bentonite thickened high viscosity index base oil and added with various additives such as extreme pressure anti-wear, anti-oxidation, anti-rust and anti-corrosion. This non-drip high-temperature grease is excellent in oxidation, hardening or softening resistance under high temperature conditions. The lubrication cycle is 10 to 15 times longer than that of general mineral oil, and the highest intermittent temperature can reach 250℃.



  • item no. :

    KE-313
  • Brand:

    Keermo
  • MOQ :

    1
  • origins :

    CHINA
  • color :

    White translucent grease
  • Port :

    Shenzhen,Guangzhou
  • lead date :

    5-7Days
  • specs
  • Other Info

Name:Bentonite high temperature grease(AKA:high temperature grease

Model:KE-313






Overview:

KE-313 Bentonite High Temperature Grease is a high temperature resistant grease made from organic bentonite thickened high viscosity index base oil and added with various additives such as extreme pressure anti-wear, anti-oxidation, anti-rust and anti-corrosion. This non-drip high-temperature grease is excellent in oxidation, hardening or softening resistance under high temperature conditions. The lubrication cycle is 10 to 15 times longer than that of general mineral oil, and the highest intermittent temperature can reach 250℃.


Scope of application:

1.Suitable for lubrication of medium and low speed sliding or rolling bearings, gears, cams, guides and chains used under high temperature and humidity conditions;

2.Recommended for boiler oven, oven conveyor belt, plastic extruder sleeve, cracking furnace induced draft fan, regenerative gas compressor, stretching tenter, resin finishing machine, hot air blower, hot oil pump motor, molten salt pump motor, Lubrication of high-temperature operation bearings such as heat setting machines.


Operating Temperature:

-10 ℃ ~ 230 ℃.


Performance Characteristics:


1.Excellent high temperature thermal stability, low volatility and long service life at high temperature;

2.It is not easy to drip oil at high temperature, reduce the phenomenon of high temperature leakage, and prolong the cycle of adding grease;

3.Excellent water repellency and corrosion resistance, suitable for use under high temperature and humidity conditions;

4.Excellent shear stability and extreme pressure anti-wear performance, excellent shock and fretting wear resistance.



Representative Materialized Data:

No.
 Item 
Typical data
1

Appearance 

White uniform grease

2

Cone penetration

280

3

Dropping point℃

N/A
4

100,000 shear test cone penetration is not more than

30
5

Water resistance (80℃)% is not more than

10
6

Copper corrosion (100℃24h) 

Qualified
7

Steel mesh oil (100℃24h)

2.0
8

Oxidation stability (100℃24h)

0.5
9

Working temperature (℃) 

-10℃~230℃


Storage notes:

1.Store in a cool, ventilated and dry place, at room temperature below 45℃, and not invert.
2.should not be close to acid and alkali, oxidants and other corrosive substances, not exposure.
3.stacking layers can not exceed 4 tubs, and should be off the ground, 10CM or more from the wall.
Handling precautions:
Handle the product with care and do not use dangerous actions such as throwing or falling.
Specifications: 
800g/tin  5kg/tubs  16kg/tubs

Request a Free Quote

If you have questions or suggestions, please leave us a message

related products
Request a Free Quote

If you have questions or suggestions, please leave us a message

For more than ten years, we have been working on grease research. Our products are widely used in military, automotive, industrial, machinery, and home industries. The company has a professional R & D team, the product has obtained a number of national patents.

  • facebook
  • Google
  • linkin
  • Twitter
  • YouTube
  • Instagram

Copyright © Dongguan Keermo Grease Co., Ltd. All Rights Reserved. Powered by dyyseo.com

   

the professional team to service !

    If you have questions or suggestions, please leave us a message