86-13380181800
1. Calcium-based grease: good water resistance, but poor heat resistance, the maximum operating temperature: 60 ℃. Price: Low. 2, Sodium-based grease: extremely poor water resistance, heat resistance and rust resistance in general, generally used at about 80 ℃, the price is lower. 3, Aluminum-based grease: good rust resistance, poor heat resistance and water resistance, the maximum use temperature of 50 ℃, the price is low. 4, General lithium-based grease: good heat resistance, water resistance,...
Read MoreThe working temperature of the lubricating part is an important basis for selecting grease. The typical component that uses grease is a rolling bearing. As far as the relationship between bearing temperature and grease life is concerned, every 10-15 ° C increase in bearing temperature reduces the grease life by about 1/2. Generally, the temperature of the outer ring of the bearing is about 15 ° C lower than the temperature of the inner ring. The temperature of the bearings working at low and med...
Read MoreWhen selecting a grease, the purpose of the grease should be clearly defined. According to the role played by grease, grease can be roughly divided into three categories: friction reduction, protection, and sealing. It depends on which part of the grease needs to be applied, which one is the main role of the grease. grease. As antifriction grease, the range of resistance to high and low temperature, the limit of resistance to rotation speed, and the load should be considered. As a protective gre...
Read MoreKE-308 top slider guide column grease is a white uniform grease prepared by high-temperature, high flash point and non-coking base oil with a lubricating thickener with minimal friction coefficient.
item no. :
KE-308Brand:
KeermoMOQ :
1origins :
CHINAcolor :
White translucent greasePort :
Shenzhen,Guangzhoulead date :
5-7DaysName:Top slider guide grease(AKA:High temperature resistant top grease)
Model:KE-308
Overview:
KE-308 top slider guide column grease is a white uniform grease prepared by high-temperature, high flash point and non-coking base oil with a lubricating thickener with minimal friction coefficient.
Application range:
Die thimble, tip, slider guide column, high temperature resistant plunger, etc.; high temperature, high load mechanical shaft, injection molding machine die thimble lubrication, electronic clean room, high clean environment equipment bearings, pumps, valves, seals Lubrication and sealing of the ring.
Operating Temperature:
-40 ℃ ~ 300 ℃.
Performance Characteristics:
1.Very small coefficient of friction.
2.good resistance to oxygen and wear.
3.high temperature and environmental protection.
4.no fouling, no coking.
Instructions:
Apply evenly to the area to be lubricated.
Representative Materialized Data:
Appearance
White uniform grease
Cone penetration
280
Dropping point℃
100,000 shear test cone penetration is not more than
Water resistance (80℃)% is not more than
Copper corrosion (100℃24h)
Steel mesh oil (100℃24h)
Oxidation stability (100℃24h)
Working temperature (℃)
-40℃~300℃
No.
Item
Typical data
1
2
3
N/A
4
30
5
10
6
Qualified
7
2.5
8
0.5
9
Storage notes:
1.Store in a cool, ventilated and dry place, at room temperature below 45℃, and not invert.
2.should not be close to acid and alkali, oxidants and other corrosive substances, not exposure.
3.stacking layers can not exceed 4 tubs, and should be off the ground, 10CM or more from the wall.
Handling precautions:
Handle the product with care and do not use dangerous actions such as throwing or falling.
Specifications:
500g/tin 5kg/tubs 16kg/tubs
KE-306 high performance white fluorocarbon grease is a white uniform grease prepared by high-temperature, high flash point and non-coking base oil with a lubricating thickener with minimal friction coefficient.
KE-305 Kelmo Fixing Film High Temperature Grease is a white uniform grease prepared by a special process using high performance base oil and modified solid lubricant.
KE-320 automotive spark plug oxygen sensor partner uses special base oil and high temperature resistant thickened, boron nitride micropowder and a special process to prevent contact between metal and metal under severe conditions. .
KE-301 Ultra High Temperature Copper Grease Grease is a high temperature anti-seize copper made of non-drip thickener thickening high temperature resistant lubricating oil, adding ultra-fine copper powder (copper oxide) and anti-rust and anti-corrosion additives. paste.
KE-303 Keermo high-speed spindle grease is a white uniform grease prepared by a special process using high-performance base oil and modified solid lubricant.
KE-302 high and low temperature high speed bearing grease is made of ester synthetic oil asthe base oil polyurea compound as thickener and is added with extreme pressure, anti-oxidation, anti-corrosion, anti-corrosion and other additives in the dust-free workshop. High temperature high speed bearing grease. This high-temperature, high-speed and low1
KE-315 Kelmo Molybdenum Disulfide High Temperature Grease is made of high temperature resistant molybdenum disulfide solid lubricant, and is made of inorganic thickener thickened synthetic oil and polyester with anti-oxidation and anti-rust additives. Molybdenum extrusion grease.
KE-313 Bentonite High Temperature Grease is a high temperature resistant grease made from organic bentonite thickened high viscosity index base oil and added with various additives such as extreme pressure anti-wear, anti-oxidation, anti-rust and anti-corrosion. This non-drip high-temperature grease is excellent in oxidation, hardening or softening1
the professional team to service !