86-13380181800
Leo@keermo.com
86-13380181800
Leo@keermo.com
1. Calcium-based grease: good water resistance, but poor heat resistance, the maximum operating temperature: 60 ℃. Price: Low. 2, Sodium-based grease: extremely poor water resistance, heat resistance and rust resistance in general, generally used at about 80 ℃, the price is lower. 3, Aluminum-based grease: good rust resistance, poor heat resistance and water resistance, the maximum use temperature of 50 ℃, the price is low. 4, General lithium-based grease: good heat resistance, water resistance,...
Read More
The working temperature of the lubricating part is an important basis for selecting grease. The typical component that uses grease is a rolling bearing. As far as the relationship between bearing temperature and grease life is concerned, every 10-15 ° C increase in bearing temperature reduces the grease life by about 1/2. Generally, the temperature of the outer ring of the bearing is about 15 ° C lower than the temperature of the inner ring. The temperature of the bearings working at low and med...
Read More
When selecting a grease, the purpose of the grease should be clearly defined. According to the role played by grease, grease can be roughly divided into three categories: friction reduction, protection, and sealing. It depends on which part of the grease needs to be applied, which one is the main role of the grease. grease. As antifriction grease, the range of resistance to high and low temperature, the limit of resistance to rotation speed, and the load should be considered. As a protective gre...
Read More
KE-720 Keermo Lubricating Silicone Grease is a modified silicone polymer as the main raw material, adding heat-resistant and excellent lubricating properties; a translucent silicone grease compound made by a specific process.
item no. :
KE-720Brand:
KeermoMOQ :
1origins :
CHINAcolor :
White translucent greasePort :
Shenzhen，Guangzhoulead date :
5-7DaysName：Bridge support anti-corrosion protection grease（AKA：Waterproof insulating grease）
Model：KE-720
Overview：
KE-720 Kelmo Lubricating Silicone Grease is a modified silicone polymer as the main raw material, adding heat-resistant and excellent lubricating properties; a translucent silicone grease compound made by a specific process.
Applicable range：
It is used for shock absorption, protection, lubrication, rust prevention and waterproofing of PTFE plates and bridge supports. It is used for lubrication, sealing and insulation of components under high temperature, high pressure or water, chemical corrosion and other harsh environments.
Operating Temperature：
-50℃ ~ 250 ℃.
Performance Characteristics:
1. Excellent high and low temperature performance and oxidation resistance, the consistency changes with temperature;
2. Excellent sealing, lubricity and adhesion, extremely low volatility and long life;
3. Excellent water resistance and oil film adhesion, compatible with most metals, plastics and rubber; excellent dielectric properties, high dielectric strength, anti-creepage, volume resistivity of 2.0*1114;
4. Excellent protection, chemical solvent resistance, preventing aging or corrosion of the surface of the material, and extremely long service life;
5. Environmentally friendly, non-toxic, odorless, in line with international environmental standards, does not contain harmful substances.
Representative Materialized Data:
No.
Item
Typical data
1
Exterior
White translucent grease
2
Cone penetration
280
3
Drop point ℃
N/A
4
100,000 shear test cone penetration is not greater than
30
5
Water resistance (80℃)% is not greater than
10
6
Copper corrosion (100℃ 24h)
Qualitied
7
Steel mesh oil distribution (100℃ 24h)
2.0
8
Oxidation stability (100℃ 24h)
0.5
9
Working temperature (℃)
-50℃～250℃
Storage notes:
1.Store in a cool, ventilated and dry place, at room temperature below 45℃, and not invert.
2.should not be close to acid and alkali, oxidants and other corrosive substances, not exposure.
3.stacking layers can not exceed 4 tubs, and should be off the ground, 10CM or more from the wall.
Handling precautions:
Handle the product with care and do not use dangerous actions such as throwing or falling.
Specifications:
800g/tin 5kg/tubs 16kg/tubs
Keermo KE-801 High voltage power supply insulation grease
A modified silicone polymer is used as a main raw material, and a material having excellent heat resistance and excellent lubricating properties; a translucent silicone grease composite prepared by a specific process is added.
Keermo KE-802 Ultra high voltage power supply insulation grease
KE-802 ultra-high voltage power supply insulation grease is a synthetic silicone oil as the main raw material, adding heat-resistant and excellent lubricating properties; transparent silicone grease composite made by a specific process.
Keermo KE-509 High viscosity damping lubricant damping grease
KE-509 High Viscosity Damping Lubricant is specially formulated from very high viscosity synthetic oils with special tackifiers, anti-corrosion, anti-corrosion additives and structural modifiers. It is designed for joints requiring retardation and cushioning. The components and the feel of the shaft of the shaft are adjusted to make the movement of1
Keermo KE-801 High voltage power supply insulation grease
A modified silicone polymer is used as a main raw material, and a material having excellent heat resistance and excellent lubricating properties; a translucent silicone grease composite prepared by a specific process is added.
Keermo KE-320 Automotive spark plug oxygen sensor companion High temperature anti-seize grease
KE-320 automotive spark plug oxygen sensor partner uses special base oil and high temperature resistant thickened, boron nitride micropowder and a special process to prevent contact between metal and metal under severe conditions. .
Keermo KE-301 Ultra High Temperature Copper Grease Thread Grease Gold Butter Anti-seize Grease
KE-301 Ultra High Temperature Copper Grease Grease is a high temperature anti-seize copper made of non-drip thickener thickening high temperature resistant lubricating oil, adding ultra-fine copper powder (copper oxide) and anti-rust and anti-corrosion additives. paste.
Keermo KE-306 High performance white fluorocarbon grease Mold white oil high temperature resistant top grease
KE-306 high performance white fluorocarbon grease is a white uniform grease prepared by high-temperature, high flash point and non-coking base oil with a lubricating thickener with minimal friction coefficient.
Keermo KE-315 Molybdenum disulfide high temperature grease High temperature bearing grease
KE-315 Kelmo Molybdenum Disulfide High Temperature Grease is made of high temperature resistant molybdenum disulfide solid lubricant, and is made of inorganic thickener thickened synthetic oil and polyester with anti-oxidation and anti-rust additives. Molybdenum extrusion grease.
For more than ten years, we have been working on grease research. Our products are widely used in military, automotive, industrial, machinery, and home industries. The company has a professional R & D team, the product has obtained a number of national patents.
Copyright © Dongguan Keermo Grease Co., Ltd. All Rights Reserved. Powered by dyyseo.com
friends link :
the professional team to service !
86-13380181800
Leo@keermo.com
Leo@keermo.com
86-13380181800
