86-13380181800
Leo@keermo.com
1. Calcium-based grease: good water resistance, but poor heat resistance, the maximum operating temperature: 60 ℃. Price: Low. 2, Sodium-based grease: extremely poor water resistance, heat resistance and rust resistance in general, generally used at about 80 ℃, the price is lower. 3, Aluminum-based grease: good rust resistance, poor heat resistance and water resistance, the maximum use temperature of 50 ℃, the price is low. 4, General lithium-based grease: good heat resistance, water resistance,...
Read More
The working temperature of the lubricating part is an important basis for selecting grease. The typical component that uses grease is a rolling bearing. As far as the relationship between bearing temperature and grease life is concerned, every 10-15 ° C increase in bearing temperature reduces the grease life by about 1/2. Generally, the temperature of the outer ring of the bearing is about 15 ° C lower than the temperature of the inner ring. The temperature of the bearings working at low and med...
Read More
When selecting a grease, the purpose of the grease should be clearly defined. According to the role played by grease, grease can be roughly divided into three categories: friction reduction, protection, and sealing. It depends on which part of the grease needs to be applied, which one is the main role of the grease. grease. As antifriction grease, the range of resistance to high and low temperature, the limit of resistance to rotation speed, and the load should be considered. As a protective gre...
Read More
A modified silicone polymer is used as a main raw material, and a material having excellent heat resistance and excellent lubricating properties; a translucent silicone grease composite prepared by a specific process is added.
item no. :
KE-801Brand:
KeermoMOQ :
1origins :
CHINAcolor :
White translucent greasePort :
Shenzhen,Guangzhoulead date :
5-7DaysName:High voltage power supply insulation grease
Model:KE-801
Overview:
A modified silicone polymer is used as a main raw material, and a material having excellent heat resistance and excellent lubricating properties; a translucent silicone grease composite prepared by a specific process is added.
Applicable range:
This product is applied to the surface of various high-voltage wires, cables and cable accessories that need to be insulated, which can be used for lubrication, insulation, sealing, shockproof and partial discharge suppression. Resistant to AC25KV high voltage.
Operating Temperature:
-50℃ ~ 250 ℃.
Performance Characteristics:
1.Good insulation. The high pressure resistance reaches 25KM/mm.
2.high and low temperature resistance.
3.Excellent lubrication and sealing.
4.Drainage performance.
5.release properties.
Representative Materialized Data:
No.
Item
Typical data
1
Exterior
White translucent grease
2
Cone penetration
280
3
Drop point ℃
N/A
4
100,000 shear test cone penetration is not greater than
30
5
Water resistance (80℃)% is not greater than
10
6
Copper corrosion (100℃ 24h)
Qualitied
7
Steel mesh oil distribution (100℃ 24h)
2.0
8
Oxidation stability (100℃ 24h)
0.5
9
Working temperature (℃)
-50℃~250℃
Storage notes:
1.Store in a cool, ventilated and dry place, at room temperature below 45℃, and not invert.
2.should not be close to acid and alkali, oxidants and other corrosive substances, not exposure.
3.stacking layers can not exceed 4 tubs, and should be off the ground, 10CM or more from the wall.
Handling precautions:
Handle the product with care and do not use dangerous actions such as throwing or falling.
Specifications:
800g/tin 5kg/tubs 16kg/tubs
KE-720 Keermo Lubricating Silicone Grease is a modified silicone polymer as the main raw material, adding heat-resistant and excellent lubricating properties; a translucent silicone grease compound made by a specific process.
KE-802 ultra-high voltage power supply insulation grease is a synthetic silicone oil as the main raw material, adding heat-resistant and excellent lubricating properties; transparent silicone grease composite made by a specific process.
KE-501 High Viscosity Gear Grease is a high performance sound absorbing grease made of high-grade refined mineral oil as base oil, lithium soap as thickener and added with viscosity index improver, anti-oxidation and anti-corrosion additives. . This high-adhesive grease can overcome the high-speed centrifugal force and is designed for lubrication o1
KE-306 high performance white fluorocarbon grease is a white uniform grease prepared by high-temperature, high flash point and non-coking base oil with a lubricating thickener with minimal friction coefficient.
KE-602 Electronic Appliance Thermal Paste is a white paste made of synthetic oil, thermal insulation filler and functional additives.
KE-310 fully synthetic ultra-high temperature grease is made of special base oil and high temperature resistant thickened, boron nitride micropowder and a special process to prevent metal-to-metal contact in harsh conditions. Disassembled.
KE-201 Keermo Food Grade Grease is a translucent silicone grease compound with modified silicone polymer as the main raw material, adding heat resistance and excellent lubricity.
KE-506 camera equipment damping grease is a transparent viscous grease composed of an inorganic thickener thickened with a very high viscosity synthetic oil.
the professional team to service !
86-13380181800
Leo@keermo.com
Leo@keermo.com
86-13380181800